Home Products Mazda

Mazda Model/Engine Type Type F/W (kgs.) Assy (kgs.) RX7 FD3S TS2B 5.80 12.20 13BT TS2C 6.00 13.10 　 TS2CW 9.20 16.15 　 R2CD 5.80 14.20 　 R3A 3.70 10.55 　 R3C 4.90 14.35 *Genuine MAZDA counter weight pn: N351-11-521 and 6 bolts pn: 805-27-236 (or 8051-27-235) are needed to 　 　 install any of the above. 　 　 OS Clutch Release Movement Alteration Kit is required to install any of the above. 　 　         RX7 FC3S TS2B 5.80 12.20 13BT TS2C 6.00 13.10 　 TS2CW 9.20 16.15 　 R2CD 5.80 14.20 　 R3A 3.70 10.55 　 R3C 4.90 14.35 *Genuine MAZDA counter weight pn: N327-11-521A and 6 bolts pn: 805-27-236 (or 8051-27-235)   　 　 for chassis No. 0 to 20000 (before minor change) are needed to install any of the above. 　 　 *Use genuine MAZDA counter weight pn: N351-11-521 and 6 bolts pn: 805-27-236 (or 8051-27-235) 　 　 for chassis No. 20001 and on (after minor change) are needed to install any of the above. 　 　 Optional Parts: Reinforced sleeve bearing kit and adjustable fork kit 　 　         RX7 SA22C TS2AS 5.10 9.80 12A TS2A  5.10 10.20 　 TS2BS 5.25 11.15 　 TS2B  5.25 11.65 *If thermal reactor and/or catalyic converter is equipped, genuine MAZDA counter weight (pn:1883-11-751A) 　 　 and 6 bolts (pn:8051-27-235 or 236) are needed to install any of the above. If 6PI and/or turbo charger is 　 　 equipped, use genuine MAZDA counter weight (pn:N351-11-521A) and 6 bolts (pn:805-27-235 or 236) 　 　 are needed to install any of the above. 　 　         Roadstar NA6CE, NA8C TS2AS 4.10 8.80 B6, BP8 TS2A  4.10 9.20 　 TS2BS 4.90 10.80 　 TS2B  4.90 11.30 *OS Release Sleeve Bearing Set is required to install any of the above. 　 　         RX-8 SE3P TS2B 5.80 12.20 13B-MPS TS2C 6.00 13.10 　 TS2CW 9.20 16.15 　 R2CD 5.80 14.20 　 R3A 3.70 10.55 　 R3C 4.90 14.35 *Sleeve Bearing 　 　 　 < Prev   Next >