Mitsubishi | Model/Engine Type | Type | F/W (kgs.) | Assy (kgs.) | | Lancer Evolution I thru III CD9A, CE9A | TS2B | 5.80 | 12.20 | | 　 | R2CD | 6.05 | 14.45 | | *OS Release Sleeve Bearing Set is required to install any of the above. | 　 | 　 | |  |  |  |  | | Lancer Evolution VII+ CN9A, CP9A | TS2B | 5.30 | 11.90 | | 4G63 | R2CD | 5.20 | 13.60 | | *OS Clutch Release Movement Alteration Kit is required to install any of the above. Genuine Mitsubishi | 　 | 　 | | Inner Kit (pn:MD977130) is required for use with OS Clutch Release Movement Alteration Kit | 　 | 　 | | *MITSUBISHI parts (pn:MD725220) or main drive shaft of MAZDA FC3S can be used as a clutch disk center | 　 | 　 | | alignment tool | 　 | 　 | |  |  |  |  | | VR4 E38A, E39A | TS2B | 5.90 | 12.30 | | 4G63 | 　 | 　 | 　 | | *OS Release Sleeve Bearing Set is required to install any of the above. | 　 | 　 | | Before order ing OS Release Bearing Set, please make sure if you model was a minor change model | 　 | 　 | | or not, as specifications differ. | 　 | 　 | |  |  |  |  | | 3000GT Z16A Turbo | TS2C | 6.50 | 13.45 | | 6A72 | 　 | 　 | 　 | | *OS Release Sleeve Bearing Set is required to install any of the above. | 　 | 　 | | *MITSUBISHI parts (pn:MD725220) or main drive shaft of MAZDA FC3S can be used as a clutch disk center | 　 | 　 | | alignment tool | 　 | 　 | |  |  |  |  | | Legnum VR4 E-EC5W (VR4) | R2C | 5.40 | 13.15 | | 6A13 | R2CD | 5.40 | 13.80 | | *OS Clutch Release Movement Alteration Kit is required to install any of the above. | 　 | 　 |
|